Weboldalunk használatával jóváhagyja a cookie-k használatát a Cookie-kkal kapcsolatos irányelv értelmében.
Menü

Rievtech RPS-U120S24 Tápegység DC 24V 5A

Ár:
16.500 Ft (12.992 Ft + ÁFA)
Bemenet: AC 100~240V
Kimenet: DC 24V
Kimeneti áram: 5A
Cikkszám: 084
Szállítási díj: 1.890 Ft
Elérhetőség: Raktáron
Menny.:db

Leírás

MODEL RPS-U120S24
OUTPUT DC Output 24V
Rated Current 5A
Current Range     Note 1 0~5A
Ripple and Noise   0~70℃ ≤120mV
Note 2 -20℃~0 ≤240mV
Voltage ADJ.  Range 24~28V
Voltage Accuracy  ±1.0%
Line Regulation ±0.5%
Load Regulation ±1.0%
Set-up Time <1.2S@230Vac  ;  <3.0mS@115Vac
Hold up Time  ≥10mS@115Vac; ≥20mS@230Vac     Full load
Temperature Coefficient ±0.03%/℃
Overshoot and Undershoot <5.0%
INPUT Voltage Range    90Vac~264Vac, 127Vdc-370Vdc
Frequency Range 47Hz~63Hz
Efficiency ( Typical) 88%
AC Current (max.) <2.7 A/115VAC ;  <1.35A/230VAC
 
Inrush Current (Typical) 20A/115Vac   ;   35A/230Vac   Cold start
Leakage Current Input—output:<0.25mA     Input—PG:<3.5mA  (264Vac input, 63Hz)
PROTECTION Over Load 5.25~6.5A
Protection type: Constant current
Over voltage 29~33V
Protection type: Shut down, re-power on.
Over temperature 100±5℃, detect on heat sink of power transistor; shut down O/P, re-power on.
Short Circuit Long-term mode, auto recovery 
Operating amb.Temp.&Hum. -20℃~70℃;  20%~90%RH  No condensing  (pls refer to derating curve)
ENVIRONMENT Storage Temp. & Hum. -40℃~85℃;  5%~95%RH  No condensing
Safety Standards UL508, UL60950, EN60950
SAFETY &EMC  Withstand Voltage Primary-Secondary:3.0KVac/10mA.
Note 3 Primary-PG:1.5KVac/10mA.
  Secondary-PG: 0.5KVac/10mA.
  Isolation Resistance 10M ohms 
  EMC Emission Compliance to EN55022, EN55024, FCC PART 15  Class B
  Harmonic Current Compliance to EN61000-3-2, CLASS A
  EMC Immunity Compliance to EN61000-4-2,3,4,5,6,11; heavy industry level
  MTBF (MIL-HDBK-217F) More than 500,000Hrs (25℃, Full load)
OTHERS Dimension  (L*W*H) 124*119*45mm
Cooling method Cooling by free air convection
 
NOTE 1. All parameters NOT specially mentioned are measured at rated input, rated load and 25℃ of ambient temperature.
2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.
3. The power supply is considered as a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies” on www.rievtech.com.

Hasonló termékek

Bemenet: AC 100~240V
Kimenet: DC 24V
Kimeneti áram: 5A
17.500 Ft (13.780 Ft + ÁFA)
Bemenet: AC 100~240V
Kimenet: DC 24V
Kimeneti áram: 4A
14.700 Ft (11.575 Ft + ÁFA)
Bemenet: AC 100~240V
Kimenet: DC 24V
Kimeneti áram: 2,5A
10.900 Ft (8.583 Ft + ÁFA)
Bemenet: AC 100~240V
Kimenet: DC 24V
Kimeneti áram: 2,5A
10.200 Ft (8.031 Ft + ÁFA)
Bemenet: AC 100~240V
Kimenet: DC 24V
Kimeneti áram: 2,5A
9.800 Ft (7.717 Ft + ÁFA)
Bemenet: AC 100~240V
Kimenet: DC 24V
Kimeneti áram: 0,63A
6.400 Ft (5.039 Ft + ÁFA)
Bemenet: AC 100~240V
Kimenet: DC 24V
Kimeneti áram: 0,63A
6.350 Ft (5.000 Ft + ÁFA)

Keresés